Team SILK AX14-60, Instruction Manual

Page: 84 / 92

AX14-60 Flange Facing Machine
83
APPENDIX E FALL-STOP KIT
1. TECHNICAL DESCRIPTION
Introduction
The TEAM
®
- Fall-Stop Kit has been designed using best engineering practice. Its design will
give every satisfaction provided that it is properly installed, operated and maintained in
accordance with the information contained within this manual. Take care of this manual; it is
an essential source of information for future reference.
Equipment Description
The purpose of this equipment is to prevent the machine it is fitted to from falling inside a
vessel, pipe or similar internal opening should the machine and base fixture break loose from
the work piece during use.
This equipment is intended for use only as a safety device when machining flanges or similar
components over unobstructed, internal openings.
This equipment is intended for use on the following standard TEAM
®
flange facing
machines:
•
TEAM ® AX14-60.
This equipment is not suitable for use in overhead flanges where the machine could fall
away from, rather than into the internal opening.
This equipment is not to be used for anything other than its intended purpose.