Team SILK AX14-60, Instruction Manual

Page: 60 / 92

AX14-60 Flange Facing Machine
59
48 --- 3 KEY 1/8" SQ. x 7/8" LONG
49 --- 2 KEY 3/32" x 1/8" x 1.687" LONG
51 CP 0278 1 BUSH 7/8" OD x 5/8" ID x 1/2" LG
52 --- 3 WORMSHAFT BEARING HOUSING - HEX SOC
HEAD CAP SCREW M5 x 10
53 CP 0252 1 SPINDLE - 16T REVERSE GEAR
54 --- 1 HEX SOC HEAD CAP SCREW M6 x 35
56 CP 0255 1 RETAINING SLEEVE
59 CP 0258 1 GEAR SELECTOR SHAFT/STOP SLEEVE
60 CP 0259 1 KNOB
61 --- 1 THIN HEX NUT 3/8" UNC
64 CP 0262 1 DOUBLE GEAR 22T/20T
65 CP 0263 1 16T GEAR ON INTERMEDIATE GEAR SHAFT
66 CP 0264 1 GEAR STACK 24T/32T/36T
67 CP 0265 1 30T DRIVE GEAR WITH BOSS
68 --- 1 THRUST WASHER
69 --- 1 SINGLE DIRECTION THRUST BALL BEARING
72 CP 0272 1 40T INPUT GEAR WITH BOSS
73 CP 0273 1 WORMSHAFT
74 --- 1 INPUT SHAFT (1,2,3,4,N)
75 --- 1 EXTERNAL CIRCLIP 16mm
77 --- 2 0.125" DIA ROLL PIN x 1" LG
78 --- 2 SKT SETSCREW - DOG POINT M8 x 16
79 --- 2 BUSH 1" OD x 3/4" ID x 3/4" LG
80 CP 0271 1 24T INPUT GEAR WITH BOSS
81 CP 0802 1 LABEL FOR FXB630 OUT-IN-N
82 CP 0807 1 LABEL FOR AS48-96/AX24-60/AX12-45
83 CP 0855 1 LABEL 1-2-3-4-N
84 --- 3 BUTTON HEAD SKT SCREW M5 x 12
85 --- 2 SPRING PLUNGER M5
86 --- 1 HEX SOC HEAD CSK SCREWS M4 x 15
87 --- 1 EXTERNAL SNAP RING
Items 2, 4, 6, 9, 12, 14, 17, 27, 28, 38, 39, 47, 55, 57, 58, 62, 63, 70, 71 and 76 not used