Team SILK AX14-60, Instruction Manual

Page: 2 / 92

AX14-60 Flange Facing Machine
1
THIS INSTRUCTION MANUAL
This Instruction Manual describes how to safely install, operate and maintain the AX14-60
Flange Facing Machine. It is an essential part of the equipment and it is important that you
take the time to read it thoroughly.
Additional copies are available for purchase from TEAM ® or from an authorised agent.
HEALTH AND SAFETY AT WORK
This document should be read carefully and fully understood before proceeding to install,
use, maintain or service the equipment.
DO NOT USE THE EQUIPMENT UNTIL YOU ARE SURE YOU KNOW HOW IT WORKS
AND WHAT ITS INTENDED FUNCTION IS.
The equipment described in this document is intended to be used by professional personnel
in an industrial environment.
Installation, operation, maintenance and servicing should only be carried out by suitably
qualified and experienced personnel.
The following symbols are used to highlight important areas of this document which relate to
potential hazards and residual risks:
Important statements regarding the use, handling or operation
of the equipment.
Warnings to prevent injury to operator and or local personnel.
Cautions to prevent misuse and damage to the equipment.
IMPORTANT NOTICE
TEAM
®
has made every effort to ensure that the information given in this document is as
accurate and as up-to-date as possible at the time of publication.
TEAM
®
will not be held responsible for any accident or equipment failure that may occur due
to misuse, unauthorised modification, inadequate maintenance, use of non-genuine parts or
use by unsuitable personnel.
TEAM
®
reserves the right to update, correct or otherwise change any information relating to
this equipment, at any time and without obligation.