Team SILK AX14-60, Instruction Manual

Page: 27 / 92

AX14-60 Flange Facing Machine
26
PACKING CASE CONTENTS
1.
AX14-60 Flange Facing Machine
2.
Small base assembly (1 off)
3.
Large base assembly (1 off)
4.
Adjustable jaw blocks (4 off)
5. Non-adjustable jaw blocks (4 off)
6.
Small ram extensions (8 off) & small ram bolts (4 off)
7.
Large ram extensions (8 off)
8.
Small ram bolts (8 off)
9. Large ram bolts (8 off)
10
Setting straps (4 off)
11.
Clocking tower
12. Clocking tower arm
13. Clocking tower finger clamps
14.
Balance weight stud bar
15.
Balance weigh
t locking nuts and washers
16.
Balance weights (1 small, 1 medium, 1 large)
17. Machine to base mounting bolts (4 off)
18. Spare bolts pack
19. Toolkit - consisting of:
Set of Allen keys, 'C' spanner, 38mm AF spanner,
19mm AF spanner, 10mm AF spanner, 46mm AF spanner,
clocking spike assembly, tool holder, pack of tips,
clocking knuckle
20. Air pipe with air control valve
21. Air filter lubricator pack
22. Instruction manual and certificates
23. Ram bolts
– short (for use on 14” base with ‘C’ spanner)
The machine and its associated equipment should be removed from the case and
visually inspected for signs of wear, damage or corrosion before use.
The AX14-60 machine when complete and in its box weighs 275 kg.
DO NOT ATTEMPT TO MOVE MANUALLY. ALWAYS USE A MECHANICAL
LIFTING DEVICE.
The AX14-60 machine drive unit weighs 90 kg.
DO NOT ATTEMPT TO MANUALLY LIFT THE AX14-60 OUT OF THE PACKING
CASE. ALWAYS USE A MECHANICAL LIFTING DEVICE.