Team SILK AX14-60, Instruction Manual

Page: 22 / 92

AX14-60 Flange Facing Machine
21
Cutting feed rate selector
Selects the rate at which the toolpost traverses across the work piece per machine
revolution. The fully pushed in
position ‘N’ disengages the traverse feed.
The feed rate depends on which leadscrew is fitted. Standard TEAM
®
machines
are supplied with a 6 TPI leadscrew unless requested at time of manufacture.
Toolpost: radial movement
The toolpost may be manually positioned along the machining arm by selecting a
neutral feed gear and rotating the leadscrew using a suitable hand tool.
Toolpost: axial movement
The toolpost movement feed knob determines the vertical position of the tool and
the corresponding depth of cut. Turn the hand wheel anti-clockwise (when looking
at the end of the handle) to move the tool towards the work piece.
CUTTING FEED RATE SELECTOR
POSTION
FEED
(mm per revolution)
1 0.18 mm
0.007”
2 0.25 mm
0.010”
3 0.46 mm
0.018”
4 0.84 mm
0.033”
N Neutral
TOOLPOST
HANDWHEEL
ROTATION
TOOL DIRECTION
TURN CLOCKWISE Towards work piece
TURN ANTICLOCKWISE Away from work piece