Teac es8, User Manual

Page: 64 / 69

Others
Item Content
Interface
USB2.0 (Full speed, available only for12Mbps) when the PC connected, real time monitoring on the PC.
Power Supply
Internal: AA NiMH battery, or AA Alkaline battery × 4
Operating temperature
-10
℃ 〜
50 (In the case of using it under low temperature, you may find it hard to see t
℃
he LCD display clearly.
If the operating temperature is out of 0
℃ 〜
40 , use a NiMH battery.)
℃
Guaranteed Operating
Temperature
0
℃ 〜
40
℃
Operating Humidity
10%
〜
85%RH (non-condensed)
Continuous Operating Time
Approximately 4 hours when using the NiMH Panasonic HHR-3SPS Meta-high 2400 series(or equivalent)
Safety Standard
VCCI Class A
Operation in case of power
Failure
You can choose the following items from the setting menu.
■
Stops recording and starts the file closing. If the external supply recovers, es8 restarts to record as new file.
■
Keeps on recording by internal battery. If the external supply recovers, es8 switches to the external one and keeps on
recording. If the external supply does not recover, it stops recording and starts the file closing when the internal battery
comes into a low state.
Internal time calibration
±30sec calibration by external signal
Calibration by GPS(optional, the internal clock is calibrated within ±35msec)
Caution: The starting time, which is written on the header when recording starts by manual operation
or level of the trigger, is precise to one second since it is the data of the second unit.
Location data recording
When connected with the optional GPS, latitude/longitude of the recording start point is recorded on the header file or
Latitude/longitude is recorded on the sampling data (updating period of latitude/longitude is 1Hz) in the case of recording
in ASCII (CSV) format. Location precision: Horizontal 20m or less, Vertical 25m or less, Conditions: Not moving, SA
(Selective Availability) = OFF
Power supply low volt. alarm
LED blinks red when the voltage is low.
Range over alarm
LED blinks red when either of the channels comes into over range status.
Dimension
150(W)×40(H)×100(D)mm (Not including extruded part)
Weight
Approximately 400g (Not including cell battery and card)
１００
１ ５ ０ ４ ０ １. ６
４.
５
▲
Ｐ Ｏ Ｗ Ｅ Ｒ Ｓ Ｗ
Ｇ Ｐ Ｓ
Ｉ Ｎ Ｐ Ｕ Ｔ
Ｄ Ｃ Ｉ Ｎ Ｕ Ｓ Ｂ
Ｋ Ｅ Ｙ Ｌ Ｏ Ｃ Ｋ
Ｐ Ｏ Ｗ Ｅ Ｒ
Ｏ Ｆ Ｆ Ｏ Ｎ Ｏ Ｆ Ｆ Ｏ Ｎ
M ADE IN J APA N NO .
S ERI AL
MO DEL NO.
e s8
FIELD RECORDING UNIT
8 ‑ 1 5 V
0 . 2 5 ‑ 0 . 1 6 A
AC A DAP TO R: AO 5C 1‑ 12 MI
外形図
Page 56