Teac es8, User Manual, Page: 13 / 69

Section 2 Name & Functions of Each Part
Section 2 Name & Functions of Each Part
This section explains about names and functions such as keys on each part of the main unit, display parts, and connectors.
ＧＰ Ｓ
ＩＮ ＰＵ Ｔ
ＤＣ ＩＮ
ＵＳ Ｂ
ＫＥ ＹＬ ＯＣ Ｋ
ＰＯ ＷＥ Ｒ
ＯＦ Ｆ ＯＮ ＯＦ Ｆ ＯＮ
① ③ ⑤
②
④ ⑥
▲
Ｐ Ｏ Ｗ Ｅ Ｒ Ｓ Ｗ
⑩ ⑫ ⑪
⑬ ⑬
⑦
⑫ ⑭
⑮
⑨
⑧
⑯ ⑰ ⑱
⑲
Name Explanations
POWER SW
①
Power switch
GPS connector
②
For connecting the optional GPS unit. Power for the GPS unit can be supplied via the main unit
of es8. In this case, an AC adaptor or external DC supply is recommended.
USB interface
③
For connecting to a PC, compatible with USB2.0
Not available for bus power operation via PC
DC IN connector
④
For connecting the attached AC adaptor or external DC power supply(8 VDC
〜
15 VDC). EIAJ
RC-5320A compatible, Voltage category 4
INPUT
⑤
CONNECTER For connecting input signal. D-SUB 25pin Hirose RDBD-25S-LNA(05)
KEYLOCK
⑥
Keylock switch for locking key operation on main unit.
LCD
⑦
LCD display of character type (20char×4lines) with back light.
Shows the instruction menu or operational status and monitors recording status.
POWER LED
⑧
Glows green when turning on. Blinks red when voltage is low.
OVER RANGE LED
⑨
Blinks red when the input signal for some channel exceeds ±120% of the range.
ESC Key
⑩
Returns the system to the Main menu.
In the details menu, you can cancel the change to move back to the menu above.
MENU Key
⑪
Moves to each menu.
Up/Down Key
⑫
Selects setting items.
Right/Left Key
⑬
Changes setting values.
ENTER Key
⑭
Establish settings and moves to the details menu.
In the details menu, you can establish the settings and move to the next menu.
REC LED
⑮
Blinks red when the system is in recording stand-by mode. Glows red when starting to record.
STOP Key
⑯
Stops recording.
REC Key
⑰
Starts recording.
STANDBY Key
⑱
Starts recording stand-by status.
CF
⑲
Memory Card Slot For inserting the CompactFlash® card
Page 5