Teac es8, User Manual

Page: 51 / 69

Section 8 Trigger Recording & Interval Recording
8.2. Interval Recording
At the specified time, recording will START and STOP repeatedly for a specified number of times. You can also specify 1 time only.
Before the interval
recording, make
sure to press
[STANDBY]
to put
the system in the
recording stand-by
(REC STANDBY)
status after the
setting.
STOP STAR STAR
Specified Pause Time Specified Record Time
STAR STOP
Specified Pause Time Specified Record Time Specified Record Time
STOP
Specified time
(Example: When repeating 3 times)
Setting of the interval recording
1.
Press [MENU] to show <RECCOND MENU>, and choose [Interval] by Right/Left key.
します。
2.
Move cursor to <StartTime> and press [ENTER]. Set the starting time by [Time Set].
3.
Move cursor to <Rec Time> and press [ENTER]. Set the recording time. Input value
in seconds according to the menu which will be shown.
4.
Move the cursor to <IntervalTime> and press [ENTER]. Set the interval time.
Specify the value in seconds according to the menu which will be shown.
The value must be 5 sec or more. The maximum value is 86400 seconds (24 hours).
5.
Move the cursor to <RepeatCount> and press [ENTER]. Set the repetition count to
interval recording. Specify the repetition count according to the menu which will be
shown.
The maximum value is 999 when recording on the CF memory card
Page 43