Teac es8, User Manual

Page: 27 / 69

Section 4 General Operations
4.2. Operations of Each Menu
Pressing [MENU] can move the menu like “<MAIN> -> <SYSTEM MENU> -> <FILE MENU> -> <RECCOND MENU> -> <COMPARATOR
MENU> -> <MISC MENU> -> <MAIN> -----“. Pressing [ESC] can return to <MAIN> from any menu.
Each key of [STOP], [STOP], and [REC] is not available when the lower menu is prepared to be shown on each menu.
Upper Menu Sub Menu
MAIN
Shows the setting parameter of recording, status of main unit, and digital value.
SYSTEM MENU
Makes settings such as sampling frequency, input range, and ON/OFF of the channel.
Sampling
: setting of sampling freqency
Range
: setting of input range on each channel
CH Use
: setting of ON/OFF on each channel
CH Name
: setting of channel name
CH Unit
: setting unit of physical quantity of the channel
CH UnitChange:
setting of offset value and transforms coefficient for physical quantity transform on each channel
Calibration:
performing manual calibration
FILE MENU
Makes settings of the recording file or recording format and formats media.
Rec File
: setting a recording file directory name, a file name, and its comments on CF memory card
FileList
:
shows a
table of recording files.
DataType
: selects a format of recording file. TAFFmat or text (CSV) format is available.
Rec Device
: selects a storage destination.
CF memory card, PC, or simultaneous recording on both of them is available.
Format Media
: formats CF memory card.
Eject Media
: performs the ejection process of the CF memory card.
Media Property
: shows the information of the CF memory card inserted.
RECCOND MENU
Makes setting of the recording mode.
Mode:
selects recording mode. The shown menu depends on selecting from among
[OFF]
(recording by normal
key operation without trigger recording),
[Trigger]
(
trigger recording), and
[Interval]
(interval recording).
COMPARATOR MENU
Makes settings of the comparator output.
Mode
: selects whether or not to use the comparator function.
Setting:
setting of the comparator output condition on each channel.
Logic
: setting the comparator output logic to And or Or of the output conditions designated on each channel.
MISC MENU
In this menu, you can control the contrast of the main unit’s LCD, or confirm the battery power or perform the
loading/saving functions of the parameter files.
Back Light
: setting of the glowing time length of LCD
Contrast
: setting of the contrast of LCD
Panel Beep
: setting the key operations beep sound to ON/OFF
Range Beep
: setting the beep sound when over the range to ON/OFF
Battery Beep
:
ロ
setting the beep sound when the battery is low to ON/OFF
LowBat
.: setting the functions when the external power supply has a low battery
Parameter
: saves or loads the setting parameter and initializes the parameter
Time Set
:
settings of the time
Comparator Check
: tests comparator output
。
GPS Information
: indicates GPS satellite information
System Info.:
shows the firmware version, FPGA version, and temperature of the inside of the main unit
Power Supply:
indicates the power supply voltage(external supply voltage in case of the external supply, cell
battery voltage in case of internal cell battery) and cell battery voltage for SRAM back-up
MAIN
Menu Moving by
[MENU]
,
To
<MAIN>
by
[ESC]
Page 19