Teac es8, User Manual

Page: 56 / 69

10.3. Initializing the Setting Information
Initialize the setting information. The initialized setting information and values are as follows.
Item Default value Item Default value
Sampling 100 Hz Trigger
Range 10 V Level Setting IGNORE
CH Use 8 RecTime 0Sec
CH Name ES8_DC Pre/Post PRE
CH Unit V Logic&Count OR/0
Unit Change A 1.000000 RepeatCount 1
Unit Change B 0.000000 External OFF
FileName ES8_0 Interval
DirName ES8_DIR1 RecTime 0Sec
Comment <ES8> IntervalTime 5Sec
DataType TAFFmat RepeatCount 1
COMPARATOR
Level Setting IGNORE
Logic AND
GPS Information
TimeZone JAPAN(UTC + 09:00)
Lat./Lon. ON
Altitude OFF
Speed OFF
Course OFF
CAUTIONS
Setting of the MISC MENU, except for setting of <GPS Information> is not initialized.
Resulting from calibration is not initialized.
1.
Press [MENU] to show <MISC MENU>.
The item shown in <MISC MENU> depends on the status when the system escaped
from the menu by a previous operation.
2.
Press the Up/Down key to move <Parameter>.
3.
Press [ENTER] to show <Parameter>.
Press Down key to move the cursor to <Default Setting>.
4.
Press [ENTER] to show the conformation message in order to initialize the setting.
Press [ENTER] to initialize the setting. Press [ESC] to cancel initializing.
5.
Press [ENTER]. The message (see figure on the left) will be shown and setting
information will be saved, and the system returns to <MISC MENU>.
Page 48