Teac es8, User Manual

Page: 31 / 69

Section 5 Basic Recording
5.2. Recording by the Key Operation
You can start or stop the recording through the key operations after setting the required recording conditions. And monitoring data can be
performed on the LCD display of the main unit.
Date/Time
Media status
Power Supply Status
Main Unit Status
1.
To show <MAIN> menu
Directory
Name/File name
Press [ESC] to show <MAIN> while <MENU> is being shown
.
The left figure of the LCD shows the main unit status as follows
.
[ □ ] shown in the main unit status display indicated the system is in STOP status.
Main Unit Status
Display Status
[ □ ]
STOP
(Stop, Idle)
[ ● ]
REC
(Recording)
[ ‖ ]
RECSTANDBY
(REC Stand-by)
[
▸
]
STORE
(File copying)
Sampling frequency
Media Consumption
Counter (Time:Minute:Second)
Recording Destination
Media Status
Display Status
DRVREADY
Ready for recording
NOMEDIA
Media not loaded, or ejected
BADMEDIA
Another format media other than the FAT16 has been
loaded or unavailable media has been loaded (It is not
recognized as a CF memory card since the CIS information
cannot be read.)
UNFORMAT
Unformatted media or media with unavailable format has
been loaded.
LOADING
The data is being loaded from the media.
WRITING
The data is being written on the media.
FORMAT
The media is being Formatted.
EJECTING
The media is being ejected.
LOWBATT
The battery is detected low.
MEDFULL
The media is full.
CAL
The calibration is being performed on the system.
Operated Power Supply Status
Display Status
Ext
Being operated by the external power supply.
Int
Being operated by the internal battery.
Display of Storage Destination, etc
Display Status
(blank)
Record on the CF memory card only
+
Record on the CF memory card and PC simultaneously
-
Record on the PC only
P
The key lock is on
=
Connecting the EsNavi program
*
Catching satellite signal(es8 is connected with optional GPS unit)
Page 23