Teac es8, User Manual

Page: 44 / 69

In the case of CSV
The data file recorded as CSV format has a structure like the following example:
Item Detail
FILE
Name of the file recorded
COMMEMT
Comment inputted in
<FILE MENU>
→
<COMMENT>
TIME
Recording start time
SAMPLE
Shows sampling frequency setting
START TRIGGER
Same to START
＿
TRIGGER of header file. Number of scan is shown after it only when pre-trigger exits.
CH
Only the available channel is shown in CH*.
RANGE
Range (2V,5V,10V) specified in
<SYSTEM MENU>
→
<Range>
NAME
The channel name specified in
<SYSTEM MENU>
→
<CH Name>
UNIT
The physical quantity unit specified in
<SYSTEM MENU>
→
<CH Unit>
0,1,2,
・・・
,n
The number of scan is incremented from 0.
LATITUDE
Shows the latitude per scan only when the optional GPS unit is connected.
Shows < ---- > when not finished measuring it.
LONGITUDE
Shows the longitude per scan only when the optional GPS unit is connected.
Shows < ---- > when not finished measuring it.
ALTITUDE
Shows the altitude of the antenna per scan only when the optional GPS unit is connected.
Shows < ---- > when not finished measuring it.
SPEED
Shows the speed of the antenna per scan only when the optional GPS unit is connected.
Shows < ---- > when not finished measuring it.
COURSE
Shows the course of the antenna per scan only when the optional GPS unit is connected.
Shows < ---- > when not finished measuring it.
CAUTIONS
Please set the sampling frequency to 50 kHz or less before choosing CSV as recording data format.
When a PC is chosen as a storage destination, neither LATITUDE, LONGITUDE, ALTITUDE, SPEED nor COURSE is recorded.
Page 36