Teac es8, User Manual

Page: 55 / 69

Section 11 Saving & Loading Settings
10.2. Loading the Settings Information
Load the setting information saved before and change the settings of the main unit of es8.
1.
Press [MENU] to show <MISC MENU>.
The item shown in <MISC MENU> depends on the status when the system escaped by a
previous operation.
2.
Press the Up/Down key to move cursor to <Parameter>.
3.
Press [ENTER] to show <Parameter>.
Confirm the cursor is located in <Load Parameter>.
4.
Press [ENTER] to show <Load>.
The present status of the registered setting will be shown in <SET01>
〜
<SET05>. The
item with <None> indicates that it has no setting parameter registered.
5.
Move the cursor to the item to load and press [ENTER]. <Warming> will be shown,
and a message will be shown to confirm whether or not the present setting information
of the main unit is replaced by loaded setting information.
Press [ENTER] to load the setting information. Press [ESC] to cancel it.
6.
Press [ENTER]. The message (see figure on the left) will be shown and setting
information will be saved, and the system returns to <MISC MENU>.
Page 47