Teac es8, User Manual

Page: 14 / 69

INPUT Connector
13 ← 1
25 ← 14
PIN No. Name Explanations
1 External Trigger Records at Low, stops at High, Interval before next recording requires over 5 seconds.
Open status available in TTL level (active Low) or High level.
2 RTC 30 sec. calibration Internal clock calibration. Falling to Low level initiates the calibration process. If the
seconds digit in the internal clock is within 30sec, the seconds is omitted to set the time. If
the seconds digit is over 30sec, the time is set to 1 minute later automatically.(available
only for the Time Set display)
Open status available in TTL level (active Low) or High level.
3 Comparator Output B When recording, if the predefined condition is fulfilled, the relayed contact output is
output.
4 Comparator Output A Rating:40V 0.25A, Delay:max.300us from sampling point
5 GND Ground
6 CH8 DC IN + For connecting an input signal of 8c polarity.
7 CH7 DC IN + For connecting an input signal of 7c polarity.
8 CH6 DC IN + For connecting an input signal of 6c polarity.
9 CH5 DC IN + For connecting an input signal of 5c polarity.
10 CH4 DC IN + For connecting an input signal of 4c polarity.
11 CH3 DC IN + For connecting an input signal of 3c polarity.
12 CH2 DC IN + For connecting an input signal of 2c polarity.
13 CH1 DC IN + For connecting an input signal of 1c polarity.
14 GND Ground
15 Reserved Reserved(not available)
16 Reserved Reserved(not available)
17 GND Ground
18 CH8 DC IN - For connecting an input signal of 8channel - polarity.
19 CH7 DC IN For connecting an input signal of 7channel - polarity.
20 CH6 DC IN For connecting an input signal of 6channel - polarity.
21 CH5 DC IN For connecting an input signal of 5channel - polarity.
22 CH4 DC IN For connecting an input signal of 4channel - polarity.
23 CH3 DC IN For connecting an input signal of 3channel - polarity.
24 CH2 DC IN For connecting an input signal of 2channel - polarity.
25 CH1 DC IN For connecting an input signal of 1channel - polarity.
Page 6