409-10100
58 of 59
Rev C
8. MAINTENANCE
The following procedures have been established to assure the quality and reliability of the CQM. The CQM
should be checked daily, and a more detailed inspection should be performed (according to your quality control
group) on a regular basis.
8.1. Touch Screen Cleaning
The front surface of the touch screen should be kept free of dirt, dust, fingerprints and other materials that could
degrade optical properties. Long term contact with abrasive materials will scratch the front surface, and image
quality will be detrimentally affected. For best results, use a clean, damp, nonabrasive cloth towel and any
commercially available window cleaner to regularly clean the surface. The cleaning solution should be applied to
the towel rather than the surface of the touch screen.
8.2. Daily Maintenance
1.
Remove dust, moisture, and other contaminants with a clean brush, or soft, lint–free cloth. DO NOT
use
objects that could damage the CQM.
2. Make sure all components are in place and properly secured.
3. Always leave the CQM turned off for a minimum of 10 seconds before reapplying power so that the
monitor initializes properly.
4. Make sure that the cooling vents on the back and side panels are not blocked.
8.3. Special Handling Precautions For Systems With The Linear Encoder Installed
Magnetic field precautions and chemicals used to clean the magnetic strip.
Summary of Contents for Crimp Quality Monitor II
Page 30: ...409 10100 30 of 59 Rev C...
Page 41: ...409 10100 41 of 59 Rev C...
