409-10100
29 of 59
Rev C
5.6. P2P
The Point-to-Point (P2P) graph on this screen shows the 50 points of the last crimp that are individually
analyzed to ensure a good crimp. If any point is outside the tolerance band, then the result of the analysis is a
Failure. P2P is a signature analysis method so there is no history other than Good or Failed. This graph only
shows the 50 points.
This screen is useful to observe the analysis of the 50 points used in P2P.
5.7. FFT
The Fast Fourier Transform (FFT) graph on this screen shows the component frequencies of the last crimp that
are analyzed to ensure a good crimp. The FFT analysis requires five or more to be outside the calculated
tolerance for a failure.
This screen is useful to observe the component frequencies used in FFT. There are a total of 32 component
frequencies that are used in the FFT. Due to screen size only a portion are shown on the screen. To view them
all, touch the graph to expand it to full screen and then use the arrow buttons to see it all.
Summary of Contents for Crimp Quality Monitor II
Page 30: ...409 10100 30 of 59 Rev C...
Page 41: ...409 10100 41 of 59 Rev C...
