NOTE
i
409-10100
5 of 59
Rev C
Using the AC power cord that is appropriate with your countries power system (typically included with the system), ensure
that the cord is plugged into a circuit that has over-current protection of no greater than 15-20 amps (country dependent).
To best use the machine and manual, open the package, inspect it, install it (using drawings and 408
instructions), and configure the machine as described in Paragraph 3.3. THEN setup the machine for production
operation.
2. DESCRIPTION
2.1. Screen Description
Many of the screens are designed to walk the operator through the crimping process with a series of arrows and
headings.
NOTE
i
2.2. Menu Bar
Once the menu appears, in most cases it will collapse again in five seconds.
Icons on the menu bar are used to access the home screen (Work Order Screen), Help, Control Panel, Back
Arrow (to go to the previous screen), and a menu collapse arrow. Once the menu appears, in most cases it
collapses in five seconds if the screen is not touched.
Home
Screen
Back
Arrow
Help
Screen Name [Screen Number]
To Control
Panel
Date/Time
Menu Collapse
Arrow
A series of icons guides the operator through the use of this monitor. Refer to the following figure.
Buttons and icons you will need to use include the edit icon, the delete (trash can) icon, and the radio buttons.
See below.
Backarrow
Menu Collapse Arrow
Edit
Delete
Select Radio
Deselect Radio
NOTE
i
Using the AC power cord that is appropriate with your countries power system (typically included
with the system), ensure that it is plugged into a circuit that has over-current protection of no greater
than 15-20 amps (country dependent).
Using the AC power cord that is appropriate with your countries power system (typically included with the system), ensure
that the cord is plugged into a circuit that has over-current protection of no greater than 15-20 amps (country dependent).
To best use the machine and manual, open the package, inspect it, install it (using drawings and 408
instructions), and configure the machine as described in Paragraph 3.3. THEN setup the machine for production
operation.
1. DESCRIPTION
1.1. Screen Description
Many of the screens are designed to walk the operator through the crimping process with a series of arrows and
headings.
1.2. Menu Bar
Once the menu appears, in most cases it will collapse again in five seconds.
Icons on the menu bar are used to access the home screen (Work Order Screen), Help, Control Panel, Back
Arrow (to go to the previous screen), and a menu collapse arrow. Once the menu appears, in most cases it
collapses in five seconds if the screen is not touched.
A series of icons guides the operator through the use of this monitor. Refer to the following figure.
Buttons and icons you will need to use include the edit icon, the delete (trash can) icon, and the radio buttons.
See below.
Using the AC power cord that is appropriate with your countries power system (typically included
with the system), ensure that it is plugged into a circuit that has over-current protection of no greater
than 15-20 amps (country dependent).
NOTE
i
NOTE
i
Home
Screen
Back
Arrow
Help
Screen Name [Screen Number]
To Control
Panel
Date/Time
Menu Collapse
Arrow
NOTE
i
Summary of Contents for Crimp Quality Monitor II
Page 30: ...409 10100 30 of 59 Rev C...
Page 41: ...409 10100 41 of 59 Rev C...
