409-10100
24 of 59
Rev C
Based on settings that were made in CQM Settings, the Learn crimps may require the operator to touch
Accept
for each Crimp.
After the display indicates
Process Learned
, you can then proceed to Production.
Touch the Production icon or the right arrow icon to move to the next task.
CAUTION
!
The Crimp Quality Monitor II is a PROCESS monitor. It is influenced by many variables that include changes in wire,
terminal, applicator, terminal condition, operator, environment, etc. Changes in any of these variables, will affect the
process and the process will have to be re-learned.
NOTE
i
5. PRODUCTION
Operation without CQM Analysis - if the user wishes to operate the terminator without doing any CQM Analysis, the
user should make sure that a part is selected and then go to the sample screen to do any crimping that they do not want
analyzed. See section 4.9 Sample
The production screens show the Work Order name, Part name, Total and Batch counters, and the overall status
of the last crimp. Selecting from the seven tabs provides differing results, graphics, and history for your use. The
number of tabs available is based on the analysis methods selected. Touching the Total and Batch count box at
the top of the screen will prepare a report showing the statistics for the production run and specifics for the
selected process analysis methods. This report is a pdf that can be printed or saved. Also on this screen is a
Reset Count
button that when touched, resets the Total count, Batch count, and all statistic data relevant to the
work order. The crimp process is still calibrated and learned when the counts are reset.
If the crimp has passed ALL of the selected analysis methods, the word “PASS” will be highlighted in green. See
below.
A crimp curve is displayed.
Touching either of the graphs will zoom on the graphs.
If the crimp fails any of the selected analysis methods, the word “Fail” is highlighted in red. See the screen
below.
Summary of Contents for Crimp Quality Monitor II
Page 30: ...409 10100 30 of 59 Rev C...
Page 41: ...409 10100 41 of 59 Rev C...
