2800 Laura Lane Madison, WI 53562 | 800.288.9383 Fax: 608.836.9044 | www.tcsbasys.com
5
The UbiquiSTAT product family is a feature rich, multi-purpose BACnet thermostat with a touchscreen interface. It can
be con
fi
gured for conventional heating and cooling, heat pump, or modulating control applications, and has a number
of heat/cool setpoint groups, and a number of output stages (speci
fi
c to UbiquiSTAT model). It contains many standard
features from the TCS SZ series thermostats, as well as enhancements and new features.
PRODUCT DESCRIPTION
MOUNTING
AND ASSEMBLY
Product Description
1
Mounting and Assembly
The UbiquiSTAT
™
is designed for wall mounting using two #6 sheet metal screws, either over a 2”x4” or 4”x4” junction
box, or directly to the wall. For best results, the thermostat should be mounted on an interior wall that represents a normal
room environment, at a height of approximately
fi
ve feet from the
fl
oor. For best temperature measurement accuracy,
avoid areas exposed to direct sunlight, unusual heat or cool sources, open doors and windows, unventilated locations,
and hot or cold air from diffusers. If using a remote room sensor, the sensor should be mounted in the same manner. The
thermostat should be mounted in an area which is accessible for adjusting settings.
The UbiquiSTAT
™
consists of a base (containing relays and terminal blocks) and a front cover (containing touchscreen
and all other circuitry). These two components are tethered together in order to prevent accidentally dropping of the front
cover and to prevent combining the base and front cover of two different UbiquiSTATs
™
(each pair is factory calibrated
and serialized together).
When mating the front cover with the base, be sure to check that no wiring interferes with the cover, and no bare wires are
exposed. Check that the tether is clear of the snap, and is completely inside the enclosure.
To remove the UbiquiSTAT
™
cover, insert a small plastic pry tool between the front cover and base on the bottom of the
thermostat. Run the tool along the seam until the halves separate.
