24
Marchesan Implementos e Máquinas Agrícolas “TATU” S.A.
RTA-6
Working preparation
• Check the adjustment of the fixation parts: Bolts, pins and retaining rings.
• Check the reservoir oil level with the rods retracted the most possible (dipper, boom,
bucket and stabilizer all lifted).
• Lubricate all grease fittings appropriately.(See page 37).
• Check the general condition of the tractor and backhoe.
• Inspect the tractor and make sure that it is in good conditions of use.
• The tractor rollover protection structure and other safety devices must be kept in
good conditions.
• Shut down the tractor before making any verification on it.
• Use headlights and safety warning when traveling on roads.
• Reduce speed on slopes, curves or narrow pathways.
• Never leave the tractor with the engine running without the operator being present.
• Be careful when hitching or unhitching the equipment, especially when using the
power take-off.
• Whenever you are transporting the backhoe, check if the boom lock is activated.
• Always shut down the power take-off before transporting the backhoe.
• Be aware of the backhoe height. Never pass under low power lines or overhead
obstacles.
• Do not travel close to ditches and holes as this may result in slipping.
• Use safety warnings when traveling on long pathways and roads.
Caution before operations
Precautions with the tractor
Precautions with the backhoe transportation
Summary of Contents for Marchesan RTA 6
Page 1: ...INSTRUCTIONS MANUAL RTA 6...
