23
Marchesan Implementos e Máquinas Agrícolas “TATU” S.A.
RTA-6
Working preparation
Final adjustments (after hitching)
Unhitching
• Pull up the hydraulic cylinders (stabilizers, dipper and bucket).
• Center the backhoe with the tractor and check if the distances are the same between
the lower arms and the respective tractor tires (letter "A" in the figure below).
• Proceed with the transversal leveling using the leveling crank of the lower right arm.
Carry out the unhitching in a flat and firm location.
• Lower the stabilizer arms, resting them on the ground.
• Lower the dipper and the bucket, resting them on the ground.
• While still using the control levers, remove the hitching pins from the third point and
from the lower arms.
• Uncople the cardan shaft from the tractor power take-off.
A
A
Summary of Contents for Marchesan RTA 6
Page 1: ...INSTRUCTIONS MANUAL RTA 6...
