12
Marchesan Implementos e Máquinas Agrícolas “TATU” S.A.
RTA-6
To the operator
1
2
3
4
5
6
170 kgf/cm²
(2.418 lbs/pol²)
05.03.03.0596
170 kgf/cm²
(2.418 lbs/pol²)
170 kgf/cm²
(2.418 lbs/pol²)
170 kgf/cm²
(2.418 lbs/pol²)
100 kgf/cm²
(1.422 lbs/pol²)
170 kgf/cm²
(2.418 lbs/pol²)
100 kgf/cm²
(1.422 lbs/pol²)
100 kgf/cm²
(1.422 lbs/pol²)
A VÁLVULA PRINCIPAL, NA ENTRADA DO COMANDO, É REGULADA PARA 180 kgf/cm² (2560 lbs/pol²)
THE MAIN VALVE IS CALIBRATED FOR 180 kgf/cm² IN THE CONTROL VALVE INLET. (2,560 psi)
LA VÁLVULA PRINCIPAL, EN LA ENTRADA DEL COMANDO, SE CALIBRA PARA 180 kgf/cm² (2560 lbs/pulg²)
Identification of the control levers
The diagram below shows the operation of the backhoe control levers and there is
an exact copy of the sticker located on the console cover.
STABILIZERS:
(Levers no.
01 and no. 06)
Move the lever forth to lower the stabilizers; move it back to lift the stabilizers.
The two stabilizer pads must be completely lowered during operations.
DIPPER:
(Lever no. 02)
Move the lever forth to extend the dipper; move it back to retract the dipper.
BOOM:
(Lever no. 03)
Move the lever forth to lower the boom; move it back to lift the boom.
BUCKET:
(Lever no. 04)
Move the lever forth to dump the load; move it back to grab a load.
HORIZONTAL ROTATION:
(Lever no. 05)
Move the lever forth to turn the unit to the left hand side; move it back to turn the unit
to the right hand side.
Never change the control valve adjustments.
IMPORTANT
Right and left hand side mentioned above refers to the position of the operator
on its seat.
NOTE
Summary of Contents for Marchesan RTA 6
Page 1: ...INSTRUCTIONS MANUAL RTA 6...