20
Marchesan Implementos e Máquinas Agrícolas “TATU” S.A.
RTA-6
Working preparation
Always check the assembling of the supporting bar (A) before hitching to
the tractor.
NOTE
Cardan shaft coupling to the power take-off
Before starting operations, check the length of the cardan shaft.
If it is necessary, cut similar parts of the "male" and "female" shaft, as well as the
protecting covers.
The length adjustment will be done when the distance between the equipment and
tractor does not allow coupling. Proceed as follows:
• First of all, disassemble the protecting covers.
• Cut the hub and the solid bar (male and female) in the
desired measures. In order to do so, couple half of the cardan
shaft to the tractor and the other half to the equipment, placing
the semi-cardans in parallel and in several operating positions.
Then, determine the correct length and mark the cutting area.
Adjusting
bar
Stabilizer
arm
Cardan
Guide
Frame
Third
point
Pump
bracket
A
Power
take-off shaft
Summary of Contents for Marchesan RTA 6
Page 1: ...INSTRUCTIONS MANUAL RTA 6...
