22
Marchesan Implementos e Máquinas Agrícolas “TATU” S.A.
RTA-6
Adjusting
bar
Guide
Frame
Third
point
Pin "A"
Working preparation
The longitudinal leveling is made through the holes of the adjusting rod and the guide,
in the following way:
• Lower the stabilizer arms completely (with the backhoe hitched and in operation
position).
• Rest the bucket on the ground to facilitate manipulation of the "A" pin.
• Using the levers (except the horizontal rotation one), level the frame longitudinally
and lock it with the "A" pin again.
Longitudinal leveling
• After hitching the backhoe to the tractor, the hydraulic lifting system (third
point) can no longer be activated. Thus, position and undulation levers must
be kept totally lowered, either during digging and transportation.
NOTE
Summary of Contents for Marchesan RTA 6
Page 1: ...INSTRUCTIONS MANUAL RTA 6...