Tandem T:Slim, User Manual

Page: 78 / 188

Customer Technical Support: 1-877-801-6901 78
Chapter 6 – Personal Profile
NOTE
Tap once for first letter displayed, 2 quick
taps for middle letter; and 3 quick taps for
the third letter.
6. Tap Press to Setup to begin
setting insulin delivery settings.
BACK
Weekday
Timed Settings
Press to Set Up
Bolus Settings
5 hrs
DURATION
10 u
MAX BOLUS
OFF
CARBS
6.3 Programming a New
Personal Profile
NOTE
Once the Personal Profile has been created, the
settings must be programmed. The first time
segment will start at 12:00 AM (midnight).
» You must program a basal rate in order to
have a Personal Profile that you can activate.
» Be sure to tap SAVE after entering or
changing a value.
PRECAUTION
If you only define a basal rate in Timed Settings
your pump will only be able to deliver basal
insulin and standard and extended boluses.
Your pump will not deliver correction boluses or
trigger BG alerts.
Timed Settings
1. Once the new profile has been
created, Tap
Basal .
2. Using the onscreen keypad, enter
your basal rate and tap
DONE .
PRECAUTION
Always confirm that the decimal point
placement is correct.
3. Tap Correction Factor .
4. Using the onscreen keypad, enter
your correction factor and tap
DONE .
NOTE
Enter the mg/dL that 1 unit of insulin will
lower BG.
12:00 AM
SAVE BACK
Basal Press to Set Up
Correction Factor Press to Set Up
Carb Ratio Press to Set Up
Target BG Press to Set Up