TANDBERG STORAGELIBRARY, Manual

Page: 18 / 86

10 Unpacking the StorageLibrary T40
Unpack
Caution
You must remove the Robot Transport Locks when powering up the unit for the
first time or it will not operate. See the procedure in section
Remove the
Transport Lock.
To unpack the StorageLibrary T40, follow the instructions below.
Carefully unpack the unit from the shipping container. Save the container and packing materials in
case you need to transport the StorageLibrary T40 in the future. The packaging is specifically
designed for the library to ensure it is not damaged during transportation.
The StorageLibrary T40 is designed to fill the weight requirements for one person to lift only when
drives, power and magazines are removed before lifting the StorageLibrary T40. However it is
recommended that two persons lift the StorageLibrary T40 for absolute safety.
Review the contents of the shipping container to be sure that all parts were included in the shipment
and no parts are damaged. A standard package for the StorageLibrary T40 consists of the following
items:
A factory-assembled StorageLibrary T40 unit containing four cartridge magazines
A Standard Accessory Kit containing:
Printed copy of the Quick Installation Guide
1 Warranty/Registration Information
Rack Mounting Kit
2 Line Power Cords: one for USA/Japan and one for European power outlets
1 Ethernet cable
Media barcode label kit (contains media labels and cleaning cartridge labels)
There will be variations of this list. Depending on the number of drives in your library and whether or
not your library is equipped with SCSI or FC drives, the accessory kit may contain a terminator and
SCSI cable.
The StorageLibrary T40 accessory kit contains no cartridges.
Complete product registration online at www.tandberg.com/csc .