TANDBERG STORAGELIBRARY, Manual

Page: 55 / 86

StorageLibrary T40 Installation and User Guide 47
Inserting a Magazine into the Unit
The right and left magazines are mirrored and can only be inserted into the correct left or right
magazine bay.
1. Enter the back of the magazine into the correct magazine bay. Make sure it is in level with the
library.
2. Slide the magazine carefully in until the eject spring engages.
3. Push the magazine further in against the spring until the magazine is latched.
Figure 20 Push Magazine until It Clicks into Place
Manual/Emergency Release of Magazines
In failure situations (either in the library itself, a power loss, or situations where you need to manually
release the magazines), a manual/emergency release is available. To activate the emergency
magazine feature, you must use the magazine release tool that is fastened to the rear of the library.
This tool must be inserted through the hole at the bottom of each magazine. See
Figure 21 The
Release Tool .
Caution
Make sure to turn off the power before you use the manual emergency release
tool
Figure 21 The Release Tool Inserted into the Correct Hole on the Left Lower Magazine
Standby Functionality
On the front panel a standby button is available.
To activate Standby mode, press the button for a minimum of 2 seconds. The StorageLibrary T40 will
enter a standby mode in a controlled manner.