TANDBERG STORAGELIBRARY, Manual

Page: 71 / 86

StorageLibrary T40 Installation and User Guide 63
RAS
Ticket Display
Message Description Suggested Action Most likely cause
(for guidance only)
1201 -
1208 Failed to fetch
at slot 01 .. 08 The robotics is
not able to fetch
the requested
cartridge from
the magazine 1. Reboot the loader and
retry the operation.
2. Remove the magazine if
possible. Remove all
cartridges.
3. Verify that the cartridge is
not damaged.
4. Insert empty magazines.
5. Power cycle the loader.
6. Retry the operation.
7. Retry the operation with a
new magazine
Defect robotics,
defect magazine,
defect cartridge
Interpreting LEDs
LEDs provide a visual indication about the status of certain library components. LEDs can sometimes
communicate that a problem exists when the RAS ticket cannot. For example, an LED can indicate a
firmware problem that prohibits the library from generating RAS tickets.
The following components of the library have LEDs:
Library
Ethernet status LED
The Maintenance Menus
Table 5 Maintenance Menus - Item Name and Description
Item name Description
Library FW upgrade Upgrades the library FW through RMI
Prepare to Ship When selected, the robotics is positioned for installing the locking screws.
The magazines are ejected to facilitate the installation.
The library cannot be safely shipped with cartridges in the magazines.
This option must be executed before the library is prepared for transport
by inserting the Locking screws.
Reboot Performs a hard reset of the library.
Restore default Sets the library settings to their factory default values.
Clear WEB password Clears the WEB password (from FPI only)