![background image](http://html1.mh-extra.com/html/tandberg/storagelibrary/storagelibrary_manual_3516504065.webp)
StorageLibrary T40 Installation and User Guide
57
10
Updating Firmware
The Administrative User can update firmware on the StorageLibrary T40 if required. The latest
firmware versions for the library can be found on
www.tandberg.com/firmware
.
You can also regularly monitor the website for firmware updates, but you need to make sure that the
firmware you download is compatible with your library and tape drives.
There are two types of firmware that can be updated on the library: library firmware and tape drive
firmware. This chapter explains how to update both the library firmware and the tape drive firmware.
Updating Library Firmware
With the Update Library Firmware command, you can install new library firmware from the remote
management interface.
Caution
If you choose to update tape drive firmware during this procedure, make sure that
cartridges are not loaded in any of the tape drives. If cartridges are loaded in tape
drives during the update process, the library loses knowledge of the cartridge
home cell in storage, resulting in library and host inventory issues.
Update the library application firmware using the following steps:
1 Download Library Firmware
Access
www.tandberg.com/firmware
and download the firmware file to your computer.
a. From the home page, navigate to your product’s firmware
b. Verify with technical support or published Release Notes that you are selecting the correct
firmware version to download
c. Select the appropriate firmware version and download the files to your computer hard drive.
2 Update Library Firmware
Update the library application firmware using the Library FW Upgrade command on the Tools >
Maintenance menu from the remote management interface.
a. Browse to the firmware file that was downloaded in Step 1 and apply the selection
b. Click on the “Upgrade” button. The upgrade process has now started
Summary of Contents for STORAGELIBRARY
