![background image](http://html1.mh-extra.com/html/tandberg/storagelibrary/storagelibrary_manual_3516504056.webp)
48
Running the Library
The following takes place before the StorageLibrary T40 goes into standby mode:
1 Finish any StorageLibrary T40 activity
2 The power to the tape drives are switched off
3 The display is turned off
4 No StorageLibrary T40 activity is allowed until the standby button is pressed again
5 The green LED on the front will blink with short blinks- long intervals
6 To leave the standby mode, press the standby button for 2 second. The StorageLibrary T40 will
then restart and perform a full inventory
Summary of Contents for STORAGELIBRARY
