![background image](http://html1.mh-extra.com/html/tandberg/storagelibrary/storagelibrary_manual_3516504035.webp)
StorageLibrary T40 Installation and User Guide
27
Details on user privileges include:
One administrative login is available on the library. The user name is Administrator
One operator login is available on the library. The user name is Operator
Any logged in operator or administrative user who is inactive for more than “N” minutes is
automatically logged out. “N” is user settable from 1 to 9 minutes
Selecting “Log Out” or “X” in the top right corner of the remote management interface closes the
application and logs the Operator and Administrator out
Only one user can be logged in at one time from either the front panel or the remote management
interface
Words Commonly Used on the FPI and RMI
Some of the words displayed on the FPI and RMI screens may need an explanation.
Table 2 Commonly Used Word on FPI and RMI
Word
Abbr. in
FPI
Description
Idle
The library is idle
Drive Empty
__
There is no cartridge in the drive.
Drive Loaded
ld
A cartridge is loaded in the drive
Drive Idle
ie
A cartridge is loaded and the drive is ready to use it.
Drive Rewinding
rw
The drive is rewinding the tape
Drive Seeking
sk
The drive is searching for specific data on the tape.
Drive Reading
rd
The drive is reading data for transfer to a host via the SCSI interface.
Drive Writing
wr
The drive is writing data received from a host to the tape.
Drive Erasing
er
The drive is erasing data from parts of or the whole of the tape.
Drive Cleaning
cl
A cleaning tape has been inserted into the drive, and the drive is
using it to clean the relevant mechanical parts.
Drive Loading
ld
A tape has been inserted into the drive. The drive is in the process of
mechanically loading the tape.
Drive Unloading
ul
The drive is in the process of mechanically unloading the tape.
Drive Update
Ready
ur
The drive has completed an internal update.
Drive Updating
ud
The drive is in the process of an internal firmware update.
Drive
Calibrating
ca
A data tape has been inserted and loaded into the drive. The drive is
in the process of measuring its physical properties.
During inventory and in the Maps menu different symbols are displayed on the FPI to indicate if there
are cartridges present in the magazines, in the drives and in the robotics.
Summary of Contents for STORAGELIBRARY
