Tandberg Data Magnum 224, Product Manual, Page: 88 / 278

70
P
RODUCT
M
ANUAL
1017472
C
HAPTER
3—C
ONFIGURING THE
L
IBRARY
Get configuration from USB —Use this option to “clone” the user selectable
configurations from a different library. Use this in conjunction with the
“Save configuration from USB” option.
The library reads data from the file shown (CAL3CLON.BIN) that
contains the user selectable configuration values (SCSI IDs, I/E Port
Enable, Cleaning Cartridge Information, SCSI element addresses,
emulation mode, language, password, saved Mode Select data, drive
configuration, and so forth).
The library then saves those settings to its own non-volatile RAM so that
it “clone’s” the device which stored the data. The user selected option
will be identical to that original machine.
Saving Configurations
To Save the Configurations to load into a different library:
1. 1. 1. 1. At the Home screen, press Maint .
If necessary, enter the operator panel password (see page 75 ).
2. 2. 2. 2. Press until the selection arrow ( ) points to USB Options .
3.
3. 3.
3.
Press Select .
Maintenance
Library Maintenance
Drive Maintenance
Cleaning Options
System Reset
USB Options
Select Back