Tandberg Data Magnum 224, Product Manual, Page: 48 / 278

30
P
RODUCT
M
ANUAL
1017472
C
HAPTER
3—C
ONFIGURING THE
L
IBRARY
Viewing the Home Screen
During normal operation, the Home screen appears on the LCD (see below).
By default, the Home screen displays the operating status of the library and
tape drive or tape drives.
Note: This screen shows a library configured with two tape drives. If your library
has one tape drive installed, the additional line (D-2) does not show a
status.
Tape drive status messages Some examples of tape drive status messages
are:
TANDBERG DATA
Lib
D-2
D-1 :
:
: Idle
No Tape
No Tape
Move Lib Maint Drive
Table 3-1
Tape drive status messages
Message Meaning
D-n: Ready A tape is loaded in the tape drive and is ready for write or read
operations.
D-n: No tape No tape is loaded in the tape drive.
See
“Loading and Unloading Cartridges in the Tape Drive” on
page 125 .
D-n: Tape Ejected The tape drive ejected a tape and it is located at the tape
drive’s door.
See
“Loading and Unloading Cartridges in the Tape Drive” on
page 125 .
D-n: Loading The tape drive is loading the tape.
D-n: Unloading The tape drive is unloading the tape.
D-n: Needs
Cleaning The tape drive requires cleaning.
See
“Cleaning the Tape Drive” on page 128 .
D-n: Cleaning The tape drive is in the process of using a cleaning cartridge.
D-n: Replace Cln
Cart The cleaning cartridge has reached the end of its useful life
and must be replaced.
D-n: The tape drive is currently writing data to tape with
compression on.
D-n: Writing The tape drive is currently writing data to tape with
compression off.
D-n: Reading The tape drive is currently reading data from the tape.