Tandberg Data Magnum 224, Product Manual, Page: 140 / 278

122
P
RODUCT
M
ANUAL
1017472
C
HAPTER
5—O
PERATING THE
L
IBRARY
5. 5. 5. 5. Securely grasp the magazine and slide it straight into the library (use care
not to twist the magazine or move it side to side—it must be inserted
“straight” into the opening). When you encounter resistance, press the
magazine firmly, and you will hear it “snap” into place.
When the magazine is fully seated, the lock icon is solid green ( ),
indicating that it is locked.
R
EMOVING
C
ARTRIDGES FROM THE
L
IBRARY
This section describes removing cartridges one at a time through the I/E Port.
To remove multiple cartridges—see “Loading Cartridges into a Magazine”
on page 120 .
To remove cartridges after a power failure—see “Removing Cartridges
Without Power” on page 175 (for both the library and a tape drive).
Note: The StorageLoader 2U LTO library is a 20-slot library (the last two slots in
each magazine are blocked).
To remove cartridges:
1. 1. 1. 1. At the Home screen, press Move .
If necessary, enter the operator panel password (see page 75 ).
2. 2. 2. 2. Press until the selection arrow ( ) points to Export .
Move
Load
Unload
Import
Export
Move
Select Back