Tandberg Data Magnum 224, Product Manual, Page: 74 / 278

56
P
RODUCT
M
ANUAL
1017472
C
HAPTER
3—C
ONFIGURING THE
L
IBRARY
Sequential –The library processes cartridges sequentially without direction
from an application.
In Sequential mode, magazines are automatically associated with tape drives
so that each tape drive and its associated magazine (or magazines) becomes an
independent autoloader.
Random is the default operating mode for the library. To change the operating
mode to Sequential, you need to enable the Sequential Mode, and set the
Restart and Loop options.
1.
1. 1.
1. At the Home screen, press
Lib
.
If necessary, enter the operator panel password (see page 75 ).
2.
2. 2.
2. Press until the selection arrow ( ) points to
Library Settings
.
3. 3. 3. 3. Press Select .
4. 4. 4. 4. Press until the selection arrow ( ) points to Operation Mode .
! ! ! !
Important
If you are using a backup application which is capable of
controlling the library, do
not configure the library to operate
in Sequential mode.
Library
Library ID
Inventory
Password
Select Language
Library Settings
Select Back
Library Settings
Operation Mode
X
Ethernet
Display Settings
Storage Settings
Restore Defaults
Select Back