Tandberg Data Magnum 224, Product Manual, Page: 31 / 278

A
UGUST
2007 M
AGNUM
224, S
TORAGE
L
IBRARY
T24,
OR
S
TORAGE
L
OADER
2U
13
I
NSTALLING THE
L
IBRARY IN A
R
ACK
Ensure that the work area is free from conditions that could cause
electrostatic discharge (ESD).
Discharge static electricity from your body by
touching a known grounded surface, such as a computer’s metal chassis.
I
NSTALLING THE
L
IBRARY IN A
R
ACK
The library is designed to be installed in a standard 4-post, 19-inch rack, using
2 units (2U) of rack space. Please read the entire section before you begin.
Two-post racks will
not
support the library . The rack-mount kit includes the
following items:
To install the library in a rack, you must obtain these tools:
A
SSEMBLING THE
R
AILS
1. 1. 1. 1. Measure the depth of your rack—Using a tape measure, measure the inside
distance from the front mounting holes of your rack to the back mounting
holes. See
Figure 2-3 , distance ( E ).
2. 2. 2. 2. Position the front and back sections of the left-side rail as shown in
Figure 2-1 , with the front rail section on top of the back rail section. Spread
the sections to the distance you measured in step 1.
Warning
Before performing any installation or maintenance procedures, be sure that the
library power switch is in the off position and that the power cord is
disconnected from the library and the outlet.
Warnung
Vor der Ausführung von Installations- oder Wartungsarbeiten ist darauf zu
achten, daß der Library-Netzschalter auf “Aus” gestellt ist und daß das
Anschlußkabel vom Library und der Steckdose entfernt ist.
Advertencia
Antes de realizar cualquier procedimiento de instalación o de mantenimiento,
comprobar que el interruptor de alimentación de la biblioteca está apagado y
que el cable de alimentación no está enchufado ni a la biblioteca ni a la toma
de corriente.
18 – M5 x 12 Crest Cup™ screws (black)
(includes two spare screws) 2 – sets of side support rails
(left-side front and back rails and
right-side front and back rails)
2 – M3 x 8 Crest Cup screws (silver)
8 – washers
#2 Phillips screwdriver Level Tape measure
!
! !
!
Important
The rails provided with the library are designed for a 4-post
rack.
A 2-post rack will not support the weight of the library.