Tandberg Data Magnum 224, Product Manual, Page: 135 / 278

A
UGUST
2007 M
AGNUM
224, S
TORAGE
L
IBRARY
T24,
OR
S
TORAGE
L
OADER
2U
117
I
NSERTING AND
M
OVING
C
ARTRIDGES
4. 4. 4. 4. Load the cartridge into the slot with the bar code label facing to the left and
the arrow facing to the right.
5. 5. 5. 5. Push the cartridge into the slot until it stops.
6. 6. 6. 6. Close the I/E port door. The lock icon illuminates solid green ( ).
7.
7. 7.
7.
Continue with the next section.
I
MPORTING
C
ARTRIDGES
T
HROUGH THE
I/E P
ORT
After you have loaded a cartridge into the I/E Port, you need to “import” it into
the library. The I/E port must be “enabled” (see
“Enabling and Disabling the I/E
Port” on page 45 ).
Note: The following steps describe how to import a cartridge through the I/E
Port. Reverse the steps to “Export” a cartridge through the I/E Port.
The StorageLoader 2U LTO library is a 20-slot library (the last two slots in
each magazine are blocked).
To import cartridges through the I/E Port:
1. 1. 1. 1. At the Home screen, press Move .
If necessary, enter the operator panel password (see page 75 ).
Figure 5-4
Inserting a cartridge into the I/E port
Note the cartridge
orientation (bar code
label to the left)
Note illustration
inside I/E port
Arrow
!
! !
!
Important
If you plan to store a cleaning cartridge in the library, see “Setting
Up Automatic Tape Drive Cleaning” on page 59 .