Tandberg Data Magnum 224, Product Manual, Page: 122 / 278

104
P
RODUCT
M
ANUAL
1017472
C
HAPTER
4—U
SING THE
R
EMOTE
M
ANAGEMENT
U
TILITY
After you successfully park the robot (front panel confirmation message: Park
for Shipping Good), replace the shipping lock prior to moving the library (see
“Replacing the Shipping Locks” on page 230 ).
Ship Lock Type If your library arrived with a red ship lock installed (see
Figure 2-10 on page 22 ), you do not need to change this option. If your library
shipped with an older version of ship lock, use this option to configure your
library for the correct lock.
Lib CUP Library Code Update – Use this option to update the code in the
library. The following figure shows the options for updating the library’s code.
! ! ! !
Important
Make sure that you select and download the correct firmware
files. Firmware for other Tandberg Data products is not
compatible with the Magnum 224, StorageLibrary T24, or
StorageLoader 2U LTO.
Caution
Do not attempt to perform library operations or power down the library until after
it automatically resets.