TallyGenicom 9050N -, User Manual

Page: 114 / 172

8-20 User Manual
Error and Warning Messages
Troubleshooting
JOBLIB Error 03
Press Start JobLibrary private mode datastream
missing PIN. Ensure the PIN is entered
JOBLIB Error 04
Press Start JobLibrary datastream attempted to
overwrite a Private job, but PIN did
not match. Ensure the PIN matches or
change the Job Name
JOBLIB Error 05
Press Start JobLibrary has insufficient storage Delete unneeded files from the
printer disk
Load Paper Tray x
Media size and type The requested size and type of paper
was not sensed in the tray Load paper of the size and type
noted. Use the Status key to
check that media size and type is
correct for the tray.
Loading First stage of printer boot cycle None
Normal Printer Operation
Maintenance Reqd Printer has reached the maintenance
interval of 300,000 pages. The end of
the life of the fuser has been reached. Press Start to acknowledge the
condition. Install the
maintenance kit including fuser
and rollers as soon as possible.
Use the Reset Maint Reqd option
in the System Menu.
Mem Size Changed
xxxM (Was xxxM) Printer recognizes that optional
memory was installed or removed Press Start to acknowledge
Net1: Comm Error
Press Start Communications error with optional
interface Remove the optional interface
and restart the printer. Call
service.
Net1: Error 1
Press Start Serial interface option: overrun error Verify that the handshaking
protocol settings match between
the printer and the host.
Net1: Error 2
Press Start Serial interface option: parity error Verify that the parity settings
match between the printer and
the host.
Net1: Error 3
Press Start Serial interface option: framing error Verify that the serial settings
match between the printer and
the host.
Net1: Error 4
Press Start Serial interface option: flow control
error Verify that the handshaking
protocol settings match between
the printer and the host.
Not Ready Printer is offline Press Start
NVRAM Failure xx Controller failure Restart printer. If the problem
reoccurs, call service
Out Of Memory The job is too complex for the
installed memory Add optional memory
Panel Locked The printer panel has been locked to
prevent changes Contact the administrator
Message Description Action