TallyGenicom 9050N -, User Manual

Page: 66 / 172

5-8 User Manual
PRINTER SETUP USING THE EWS
Networking
11. Ensure [Protocol] is set to [LPR].
12. Ensure [Queue Name] is lp and [SNMP Status Enabled] is deselected.
13. Click [OK].
14. Follow on screen instructions to finish installing the printer.
Port 9100
1.
Select [Start].[Settings].[Control Panel].[Printers and Other Hardware].
2.
Select [Printers and Faxes].
3.
Click [Add Printer] and then click [Next].
4.
Select [Local printer attached to this computer], clear the [Automatically detect and install
my Plug and Play printer] check box, and then click [Next].
5.
Select [Create a New Port] and select [Type Standard TCP/IP Port].
6.
Click [Next].
7.
[Welcome to the Add Standard TCP/IP Printer Port Wizard] appears.
8.
Click [Next] and provide the following information. Enter [Printer name or IP address],
for example: 172.168.1.31. If the above IP address is entered, the Port Name will default
to IP_172.168.1.31.
9.
Click [Next]. [Additional Port Information Required] is displayed.
10.
Under [Device Type], select [Custom] then [Settings].
11.
Ensure [Protocol] is set to [Raw].
12.
Ensure [Port Number] is 9100 and [SNMP Status Enabled] is deselected.
13.
Click [OK].
14.
Follow the instructions on the screen to finish installing the printer.
CREATING A SHARED PRINTER
Create a shared printer as required.
Settings Windows NT 4.0/2000/XP/Server 2003
The following procedure explains how to do the settings, using Windows XP as an example.
1.
Click [Start], and then select [Printers and Faxes]. The [Printers and Faxes] window
appears.
2.
2. Select the icon of a printer to set, and then select [Sharing] from the right-click menu.
Then the printer properties dialogue box is displayed.
3.
3. Click [Share this printer] and enter a share name.
4.
Click [Additional Drivers] and select a substitute driver to install, and then click [OK].
5.
When installing any additional operating system driver, an input screen is displayed for
the printer driver file location. Insert the attached CD-ROM and specify the appropriate
folder.