TallyGenicom 9050N -, User Manual

Page: 73 / 172

User Manual 5-15
PRINTING FROM UNIX
Networking
Selecting a Paper Tray
When selecting a paper tray, either the paper size or the tray itself is specified. If the paper size
is specified, the printer automatically searches and selects the tray where the specified paper is
loaded. The following parameters can be specified:
NOTE: If several parameters are specified in one "lpr" command, data may not be printed correctly.
NOTE: The system default is used if no tray number is specified, a specified tray is not loaded, or paper of a
specified size is not loaded.
NOTE: This option is for specifying a paper size only. Paper is selected but the document size is not
corrected according to the paper size.
NOTE: If the print data specifies a paper tray, the tray specification by the data becomes valid and that by
the -C option becomes invalid.
NOTE: If an unacceptable combination is specified, the printer may not operate correctly.
NOTE: For some print language, the specification may be invalid.
Selecting a Paper Output Tray
The following parameters can be specified:
PARAMETER DESCRIPTION
INTRAY1/intray1 Selects Tray 1
INTRAY2/intray2 Selects Tray 2
INTRAY3/intray3 Selects Tray 3
INTRAY4/intray4 Selects Tray 4
A4/a4 Selects the tray where A4 paper is loaded.
B5/b5 Selects the tray where B5 paper is loaded.
A5/a5 Selects the tray where A5 paper is loaded.
LETTER/Letter Selects the tray where Letter paper is loaded.
LEGAL/Legal Selects the tray where Legal paper is loaded.
Parameter Description
OUTUP/outup Ejects prints to the rear tray (option).
OUTDOWN/
outdown Ejects prints to the center tray.