TallyGenicom 9050N -, User Manual

Page: 41 / 172

User Manual 3-15
Tray Settings
Basic Printing Tasks
4. Click OK .
Input Tray Linking
When an input tray runs out of paper, auto tray changing enables the printer to switch to another
available tray that contains the same size and paper type. You can select auto tray changing via
the operator panel, Printer Properties, or web interface.
The most convenient way to enable this feature is by using your Printer Properties. You may
also enable this feature at the Operator Panel or by using the EWS.
To select auto tray changing through your Printer Properties:
1.
Select the Paper Options button in the Paper tab within your Printer Properties.
The Paper Options window appears.
2. Select Auto Tray Change .
3. Click OK .
4. Click OK .
Output Bin linking
When an output bin reaches capacity, the tray full sensors are activated. You can select output
bin linking to have remaining pages sent to an open bin. By default this option is turned on. It is
located in the Operator Panel’s Print Menu.
Manual Feed
Tray 1 MPF can be used for manual feed. You must also set your Printer Properties for manual
feed. Tray 1 normally operates in multiple-purpose mode, where multiple sheets can be loaded
and printed continuously. In Manual mode, you are prompted to press the Start button for each
sheet.
The most convenient way to enable this feature is by using your Printer Properties. You may
also enable this feature at the Operator Panel or by using the EWS.
To select manual feed through your Printer Properties:
1.
Select the Paper Options button in the Paper tab within your Printer Properties.
The Paper Options window appears.
2. Select Tray 1 is Manual Feed .
3. Click OK .
4. Click OK
Media Check
By default the printer selects the input source based on the paper size requested. If the paper
size requested is not loaded in any input tray, the printer feeds from the default input tray. Media
Type is not a factor in the printer selection of the input tray. When Media check is enabled, the
printer first checks the default input source to see if it has media loaded that matches both the