TallyGenicom 9050N -, User Manual

Page: 62 / 172

5-4 User Manual
PRINTER SETUP USING THE EWS
Networking
2. If not already configured, a suitable IP address, Subnet Mask and Gateway address should
be configured. Please refer to the on-line help if necessary. It is vital that the IP address
entered is unique and valid. Entering an incorrect IP address may cause severe network
problems. Please check the address with the network administrator.
3. If your network environment uses domain names, DNS should be enabled and configured
on your system. However, this step is not essential to enable network printing.
4. Restart the operating system.
WINDOWS 95/98/Me
1. Click the [Start] button, select [Settings] and then click [Control Panel].
2. In the [Control Panel] double-click on the [Network] icon.
3. In the [Network] dialogue box click [Configuration Panel].
4. If the [Client for Microsoft Networks] is not listed, click [Add].
5. In the [Select Network Component Type] dialogue box, select [Protocol] then click [Add].
6. In the [Select Network Protocol] dialogue box, select [Microsoft] from the list of
manufacturers, then select [TCP/ IP] from the list of network protocols, then click [OK].
7. The Windows installation CD-ROM may be required. Follow the remaining dialogue box
prompts.
WINDOWS NT 4.0
1. Click [Start], select [Settings] and then click [Control Panel].
2. Double-click the [Network] icon.
3. In the Network dialogue box, click the [Protocols] tab.
4. If the [TCP/IP Protocol] is not listed, click [Add].
5. In the [Select Network Protocol] dialogue box, select [TCP/IP Protocol] and click [OK].
6. The Windows NT installation CD-ROM may be required. Follow the remaining dialogue
box prompts.
WINDOWS 2000
1. Click the [Start] button, select [Settings] and then click [Network and Dial-up
Connections].
2. Double-click the [Local Area Connection] icon. In the [Local Area Connection Status]
dialogue box, click [Properties].
3. In the [Local Area Connection Properties] dialogue box, click [Install].
4. In the [Select Network Component Type] dialogue box, select [Protocol] and click [Add].
5. In the [Select Network Protocol] dialogue box, select [TCP/IP Protocol] and click [OK].
6. Click [Close] button in the [Local Area Connection Properties] dialogue box.
Click [Close] in the [Local Area Connection Status] dialogue box.
WINDOWS XP AND VISTA
1.
Click the [Start] button and select [Control Panel].
2.
Select [Network and Internet Connection] and [Network Connection].