TallyGenicom 9050N -, User Manual

Page: 63 / 172

User Manual 5-5
PRINTER SETUP USING THE EWS
Networking
3. Double-click [Local Area Connection] and click [Properties] in the [Location Area
Connection Status] dialogue box.
4. If the [Internet Protocol (TCP/IP)] is not listed, click [Install.].
5. In the [Select Network Component Type] dialogue box, select [Protocol] then click [Add].
6. In the [Select Network Protocol] dialogue box, select [Internet Protocol (TCP/IP)] then
click [OK].
7. The Windows XP installation CD-ROM may be required. Follow the remaining dialogue
box prompts.
Once the protocol has been installed and configured in Windows, the next step is to configure
the TCP/IP parameters in the network printer.
CONFIGURING AS A NETWORK PRINTER
The printer CD will auto install the PCL6 driver. Other drivers on the CD can be installed
manually as detailed below.
WINDOWS 95/98/ME
When printing using TCP/IP, use the Microsoft LPR.
WINDOWS NT 4.0
With Windows NT 4.0, use the Microsoft LPR
In order to use Microsoft LPR, it must first be installed into your operating system.
NT 4.0 requires administrator privileges.
Microsoft LPR
To install this port, the following needs to be carried out.
1. Select [Start], [Settings], [Control Panel] and then select [Printers].
2. Select [Add Printer] Wizard.
3. Select [My Computer] and then [Next].
4. Select [Add Port].
5. Select [LPR Port] and then [OK].
6. In [Name or address of server providing lpd] type the host name or IP address of the host
for the printer you are adding.
7. In [Name of printer or print queue on that server] type the logical printer name “lp” and
then click [OK].
8. Follow the instructions on the screen to finish installing the LPR-compatible printer.
If the LPR port is not available, install the Microsoft TCP/IP Printing Service.