Parameter group
Parameter
Description
Barcode
On/Off*
With this function selected it is possible to print different
barcodes and LCP (Large Character Printing). The
definition and activation is performed by special sequences
through the interface. Since this selection is effective for all
emulations it must be noted that conflicts in sequence
conformity with the selected emulation may occur. For this
reason the barcode function must also be switched on and
off by MTPL sequences. (The possible barcodes, LCP
characters and their usage are described in the Barcode
Programmer’s Application Manual and in chapter 2).
Barmode
Secured
Unsecured
In secured mode, the space which the barcode characters
require is “protected”. In each line, other barcode or normal
characters can also be printed. These additional characters
are printed in the current line and in the subsequent lines,
without affecting the barcode. Consequently, normal
characters can be printed in every line to the right or left of
the barcode.
In unsecured mode, the required paper transport for
printing barcodes and LCP is carried out automatically and
it is not possible to print more than one line of normal
characters in the barcode line. All characters in the mixed
line are printed such that their bottom edges are in a
straight line.
This function may be switched on and off by sequences.
For more information about Barmode see chapter 2.
Menu description table
1 - 20
