Mechanical
adjustments to the
printer
You have the possibility of adjusting the paper detection light barriers
within this test menu.
With the help of this menu option you can compensate for mechanical and
opto-electrical tolerances in paper handling. You are allowed to shift print-
ing by 1/72 inch steps downwards or upwards. The default setting is
3/72 inch.
Only set a new parameter if you notice that the printing starts before the
physical page start.
Setting the basical
top margin and
L/R adjustment
Insert the fanfold paper and set the Paper Path Selection Lever to Tractor
mode. Put the printer into this Test mode by pressing the keys 1, 2 and On-
line while switching on the printer as shown below for about three seconds.
The printer starts initializing.
The display indicates Loading Defaults.
The paper is fed to the TOF position automatically, and printer prints the
horizontal bar line. The display changes to:
STOP
Key 1
Key 2
Mechanical adjustments to the printer
3 - 12
