It is also possible to change to Setup mode when you are in Test mode if
you want to change the configuration for the test printout.
To do this, press the key Setup. The printer then changes to Setup mode
and the first of the 15 main levels is then displayed.
Program your printer in the usual way for the test printout to change the
parameters. See chapter 1,
Programming via the operating panel.
By pressing the key Setup you exit Setup mode and the printer once again
returns to Test mode.
Test mode Off is displayed. Press the key Online, the test printout starts.
The self-test can be interrupted by pressing the key Online which will stop
printing and put the printer into Offline status.
Before you begin printing, you can adjust the paper for the printout with
soft keys
<
and
>
.
Online
Adjust Paperway
Menu Char
Setup
Setup
Testmode Off
Park < > LF/FF
Online
Test functions and hardware settings
3 - 4
