Parameter group
Parameter
Description
Skip
0* / 0.5 / ... / 3.5 inch
Selects one of seven defined values for skip over the paper
fold.
ESCChar
ESC *
ESC+$$
The type of escape character which leads escape
sequences can be selected. Escape character only or
escape character plus two $$ characters.
(You will find a description in chapter 2.)
Emulate
MTPL
Epson LQ-850+/
*
IBMPropr. XL24
IBMPropr. XL24+AGM
IBM Propr. XL*
MTPL
Epson FX 850+/
1050+
Selection of the emulation mode. The MTPL
emulation is also available in the other emulations.
The sequences of the IBM AGM mode are basically the
same as those of the IBM Proprinter XL24. The graphics
commands are similar to those of the Epson mode.
Note:
Epson LQ850+
➨
narrow printer
Epson
➨
wide printer
Bidir
On*
Off
Switch on/off bidirectional printing.
I/O
The standard version is equipped with a parallel interface
only.
Buffer
0 / 1.7 / 10 / 40 kB
0 / 1.7 / 19 / 40 kB
Selection of the size of the interface buffer.
Values 0 are not displayed if the serial interface is installed.
Serial
This parameter is displayed only if the serial interface
module is installed.
Baud
19200
9600*
4800
2400
1200
600
300
Selection of Baud rate for data transmission
(Baud = bits per second).
Serial
Menu description table
1 - 14
