TAGLIAVINI ROTOR RT 68, User Manual

Page: 89 / 124

Pag. 89
13.4 Day and hour set-up
Description
Hour and day setting is done by pressing and holding for
at least 5 sec. the CLOCK and ENTER keys at the same
time. Change the days of the week and the remaining
parameters with the UP-DOWN keys and move from one
parameter to another by pressing the ENTER key, to exit
press the curved arrow. Dour and day setting can be carried
out using a single controller. Various oven controllers will
automatically synchronize when the programming has
come to an end (synchronization between all connected
controllers). This synchronization will be implemented
immediately or on ignition
Description
If a recipe must be locked (key symbol next to the name)
and if we want to change it, act as following:
Press and hold the ENTER key for at least 5 seconds,
enter in the recipe's block code, here you must enter the
correct code (previously inserted in first level parameters)
and then press the V button.
To invoke a previously set program, press ENTER, here
you will enter in the recipe list by using UP or DOWN
arrows to select the desired recipe and by pressing the
centre button corresponding to the V symbol, the recipe
is invoked. At this point to launch the recipe is enough to
press the START/STOP button.
For furnace manual operation, without involving recipes,
select the manual program.