Pag. 39
8 OVEN UTILISATION
8.1 Daily power-up and component use
DAILY POWER-UP
Power-on the oven 30-40 minutes before you start baking, due to it's considerable size. It can be performed
either manually or by means of programmed ignition. Once it has been powered on, the oven will set itself to
the set temperature and maintain it by turning setting coils/burner intervals. In any case it is necessary to open
the main water valve, closed at the end of the previous session.
Once operating temperature has been reached, wait another 10-15 minutes before the first cooking in order to
allow the oven to acquire an homogeneous thermal mass sufficient to ensure good cooking results.
LOADING INTO OVEN- COOKING - UNLOADING FORM OVEN
Before baking make sure, that the vapour exhaust valves are closed in order to make the vapour phase effective.
It is recommended that you proceed with furnace loading always using a full carriage of pans. It is also
recommended to perform carriage insertion into the oven as quickly as possible. During cooking do not open
the door. The furnace unloading should be done with the use of special heat-resistant gloves.
STEAM EXHAUSTER
The overlying hood is equipped with an extractor for steam escaping from the oven door during carriage
insertion and extraction operations. Steams in the rooms are sucked into the hood through a stainless steel
tube connected to the steam discharge valve, its lever being located in the upper part of the door. The steam
valve is closed when the lever is pushed completely toward the oven and opened when the lever is pulled
toward the operator. It is recommended that, during cooking, the steam aspirator operates at low speed only
during carriage extraction from the oven. When the oven door is opened the steam aspirator will switch to high
operating speed in order to limit steam diffusion in the work area. The aspirator can be switched on even when
the steam exhaust valve opens in order to dry the product.
Summary of Contents for ROTOR RT 68
